1. +86-0755-29550168
  2. 2355878887@qq.com

  3. Reuners No Public

The reason why the color of the image on the T-shirt transferred by the heat transfer label is very weak

  • 132
  • Jimmy at
  • September 02, 2017

Transfer to the T-shirt on the image color is very weak, mainly because of the following aspects:
(1) the quality of transfer ink, you can try another kind of ink;
(2) the problem of ink-jet printing paper, some inkjet printing paper can not transfer the image completely, you can choose special coated ink-jet printing paper;
(3) the relationship between the temperature and the time of the transfer, this is the problem of operating skills. If the time is too short, the temperature is not enough, ink transfer is not sufficient, but also caused by the weak color of the main reasons;
(4) T-shirt fabric selection, if the transfer in cotton fabric color words is a little light, this is the extent of adsorption of fabric on ink decision, if the transfer in the chemical fiber fabric color is very bright.
Matters needing attention:
In the design of thermal transfer mark, the printing content should not be too close to the edge of the whole product, leave the upper and lower sides of each side at least 2 millimeters, so as not to cut the content when cutting.